Plan before you print
How big could your poster be?
Compare two-sheet and four-sheet arrangements using the paper in your printer. Set a margin and a shared overlap to estimate the image area after trimming and joining.
Estimated joined image area · width × height
390.0 × 564.0 mm
15.35 × 22.20 in
4 A4 sheets · portrait paper · 2 across, 2 down
5.0 mm trimmed from every edge of each sheet; 10.0 mm shared overlap at each join.
This sheet-assembly estimate is not a Split Print output preview. Split Print fits each source page to the selected sheets, so artwork size and printed overlap can differ. Printer margins and print scaling also affect the result. It does not preserve your source’s physical scale. Check the app preview and a printed test pair.
How the estimate works
The model assumes you trim the same margin from every edge of each sheet, then overlap the remaining image panels by the amount entered. A shared band counts only once in the finished image. The dimensions describe that joined image area, not the outer size of untrimmed paper.
Width = columns × (sheet width − 2 × margin) − (columns − 1) × overlap
Height = rows × (sheet height − 2 × margin) − (rows − 1) × overlap
Current settings, in millimetres:2 × (210.0 − 2 × 5.0) − 1 × 10.0 = 390.0 mm2 × (297.0 − 2 × 5.0) − 1 × 10.0 = 564.0 mm
Displayed dimensions are rounded. One inch equals 25.4 mm. A zero-margin estimate assumes borderless coverage; check whether your printer supports it.
What should I enter for the margin?
Use the unprinted border measured on a test sheet, or a margin you intend to trim. The 5 mm default is an example, not a claim about your printer. This simplified model uses the same margin on every edge.
Is the overlap the same as the app’s setting?
Here, overlap means the physical width of the repeated band after printing. Split Print applies its overlap setting before fitting the source to paper, so the printed band can have a different width. Use a measured test join for a closer estimate.
Will my image fill this area?
That depends on its proportions and how it is fitted and printed. This tool does not read an image or PDF, calculate image resolution, or set an exact output size. For a plan or sewing pattern that needs an accurate physical scale, use a workflow with explicit scale control and measure a printed reference.